Marlin Cowboy Models

Our Cowboy Action Retrofit stocks are designed to give your modern, late model Marlin rifle the same appearance as early original models produced in the late 1800s and early 1900s. Early and late model stocks are not generally interchangeable due to differences in dimensions and angles of the receiver tangs, internal inletting, buttplates, etc. The stocks on this page, together with our reproduced steel crescent rifle buttplates, will impart the classic look of the Old West to your favorite modern rifle.

Please note: we have slimmed-down retrofit forearms available only for the model 1894 Cowboy Limited with and octagonal barrel. We do not manufacture slimmer forearms for carbine or round barrel rifle models, or for the late model 1895.
!
Marlin 94 Cowboy ST CR

Marlin Cowboy Shooter Straight Grip Buttstocks

Please select your model from the options.

Buttplates for crescent style stocks are available below.

Marlin Cowboy Shooter Pistol Grip Buttstocks

Please select your model from the options.

Buttplates for crescent style stocks are available below.
Larger picture

Marlin Model 94 Cowboy Octagon Barrel Forearm

For use on the Model 94 Cowboy (1894CB), will not fit the Model 95 Cowboy.

 

 

This forearm will also fit the Late 94 and 336 original-issue styles fitted with octagonal barrels, offering a slimmed-down version of the factory forearm.
Larger picture

Cast Steel Crescent Buttplate, as-cast

For the DIY guy, these cast buttplates are in the rough and ready for your drilling, polishing, and bluing or case coloring. You will need professional grade polishing wheels and drill press for finishing.

 

Fits models 1888, 1889, 1891, 1892, 1893, 1894, 1895, and 1897, as well our our Marlin Cowboy Shooter Retrofit stocks.

Minor fitting is required whether for use on an original or a reproduced stock. Requires two screws which are available elsewhere on this page.

Marlin Buttplate Screws

A pair of blued screws of the proper size and configuration for Marlin rifle buttplates.
Deluxe Stock Finishing Kit

Stock Finishing Kits

Convenient in-a-box supplies for fitting and finishing stocks. Save money by ordering the kit!

We offer two stock finishing kits. The Standard Kit consists of inletting black, three grits of sandpaper, filler/sealer, PGW Classic Oil Finish, neutral colored gunstock wax, a green "Scotch-Brite" pad (replaces steel wool), polishing cloth, and brushes. Our Deluxe Kit adds a straight file, a half round file, and straight and curved hand gouges -- everything you need to properly fit and finish stocks at a savings over buying the products individually, in one handy box. The Standard Kit is $28.50; the Deluxe Kit is $47.50. Note: Due to Postal and Customs Regulations, we are unable to ship this item internationally. This includes shipments to Canada.